Burris Instruction Manuals
User manual ballistic laserscope
Riflescope Users Guide
Mount Chart
Burris Mount fit information
Warranties
FOREVER and LIFETIME WARRANTIES
All rifle and handgun scopes, Signature Binoculars, Signature Spotting scopes, and all rings and bases carry the Burris-exclusive Forever Warranty. If any of these products is ever found to have defects in materials or workmanship, Burris will, at our option, repair or replace it at no charge, even if you are not the original owner. Many Burris products are warranted by the Burris Lifetime Warranty which protects the original owner from any defects in materials or workmanship for as long as they own the product. All other products (including the Laser Rangefinder, Image Stabilizing Binoculars, and other binoculars and spotting scopes) are warranted for one year. LRS electronics are warranted for 5 years. All Burris products to be repaired under warranty must be returned to Burris, 331 East 8th Street, Greeley, Colorado, 80631.
Shipping charges to Burris should be prepaid by the owner. Insure the shipment. Burris can't be responsible for your product until we receive it. There are no other warranties, either expressed or implied, contained herein except for such that may arise under certain state laws. In that event, said implied warranties are limited in scope and duration to the terms of this warranty. Burris is not liable for incidental or consequential damages including but not limited to lost profits or other economic or commercial losses. This warranty gives the owner certain legal rights, and possibly other rights which may vary from state to state.
Things you should check before returning the scope
A significant number of scopes are returned to Burris each year that are found to function perfectly. To avoid unnecessary delays and expenses we encourage you to check for the following conditions.
Insufficient windage adjustment
1. Base mounting holes drilled out of alignment with center of bore
2. Barrel threaded into receiver at an angle
3. Scope tube bent at bell or eyepiece
Solution—Use Burris universal bases with windage adjustment or Signature Rings and Pos-Align Offset Inserts to correct any alignment problem. Bent tube must be returned to Burris for non-warranty repair.
Insufficient elevation adjustment
1. Receiver diameter out of specification
2. Barrel threaded in at an angle
3. Scope tube bent
Solution—Receiver or barrel problems will require shimming or the use of Burris Signature Rings and Pos-Align Offset Inserts. .001" will move point of impact approximately one inch at 100 yards. Bent tube must be returned to the factory for non-warranty repair.
Grouping or accuracy
1. Barrel or chamber throat erosion
2. Stock warpage
3. Stock Bedding problem
4. Loose mount
5. Heavy trigger pull
Solution—Consult with competent gunsmith
Focus or image not clear
1. Object too close
2. Eyepiece out of focus
3. Parallax adjustment not set correctly
Solution—Read instructions on how to focus reticle and parallax adjustments.
When returning the scope be sure to include:
1. Make yourself a note of your scope’s serial number for use when calling to check on your in-service scope.
2. Complete name and full address.
3. A short note describing the nature of the problem as accurately as possible.
4. Ship the scope prepaid and Insured by mail, UPS, or other parcel service. Burris can’t be responsible for your scope until we physically receive it. Burris pays for shipping back to you.
5. Insure the shipment against loss.
Send the scope to the following address:
Burris Company, Inc., 331 E. 8th Street, Greeley, Colorado 80631
Optional repair center for foreign customers
Veijo Karki
Airakselantie 1200
Airaksela 71490
Finland.
Phone: 358-17-362-4145
